Configure a Virtual LAN

Use this procedure to create, edit, or delete a Virtual LAN (VLAN).

Go to Profiles and select a target device profile.
The Profiles dashboard opens.
Select the Interface tab.
The Interface dashboard opens, displaying the Virtual tab.
Under the Virtual tab, choose from the following actions:
- Select to add a new VLAN. Proceed to the next step.
- Under the Actions column in the table, choose from the following actions:
  - Select associated with a VLAN to edit it. Proceed to the next step.
  - Select associated with a VLAN to delete it.
Configure settings under the Basic, IPv4, Security, and Routing tabs.
After you have completed configuring the settings, choose from the following actions:
1. Select Revert to restore default settings or restore the last saved settings.
  
  Note
  You cannot restore default settings after applying or saving changes.
2. Select Apply to commit the configured settings.
  
  Note
  This does not permanently save the settings you configured. If you perform a Reload (warm reboot), applied settings will be lost.
3. Select Save to commit and save the configured settings.
  
  Note
  
  If you do not select Apply or Save, the settings that you configured are not saved when you move away from the configuration window.